Sonoff SNZB-01P Doorbell Icon

Project Overview

This is a simple icon designed for the SONOFF SNZB-01P Zigbee Wireless Switch. It serves as a visual identifier when using the button as a smart doorbell. The model is designed for multi-color printing using an AMS.

Print Details

This is an extremely fast and efficient print:

• Filament used: ~1.5g
• Print time: ~13 minutes (on standard settings)
• Lead-in/Wipe: Minimal filament waste due to the small size.

Scaling for Other Buttons

While sized specifically for the Sonoff SNZB-01P, this model is a flat-back STL. You can easily scale the X and Y dimensions in Bambu Studio to fit other smart buttons (like IKEA TRÅDFRI, Aqara, or Tuya switches).

Assembly

• Adhesive: Use a small dab of super glue or a piece of thin double-sided tape to attach it to the button face.
• Surface Prep: Clean the button surface with alcohol first for the best bond.

Recommended Settings

• Printer: Any Bambu Lab printer with AMS.
• Layer Height: 0.2mm is sufficient.
• Supports: None.
• Infill: 15% (not critical).