Mounting frame for MPX connectors in Eclipson Apex
Print Profile(1)
Description
Mounting frame for MPX connectors in the fuselage of the Eclipson Apex.
Since there were too many connectors to connect the four flaps of the wings in the Apex to the fuselage and the receiver, I made a mounting frame to install the 6-pin Multiplex connectors there. The cables for the servos can be soldered to the connectors to easily connect the wings.
I left the connector in the wings loose for more security. This is of course also possible with a fixed solution, but it was not to my taste.
When installing the mounting frame, it makes sense to insert the frame before the “Center Tube” is installed. It is of course also possible afterwards, but a bit trickier.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)