Dual-color design plant pot (no AMS)

This elegant vase has a modern and minimalist design that easily adapts to any environment. It does not require an AMS

The inside of each vase is designed to house an interchangeable inner pot (with a drainage system that combines with the one at the bottom of the outer pot), to adapt to succulent cultivation or hydroponic growth. The project is printable in various color combinations, offering ample customization freedom and making this set a practical, modular, and decorative solution for your plants

If you want to use the hydroponic version, I recommend printing with PETG (it has significant chemical resistance, water resistance, is durable, and has good formability). However, if you have ASA available, I recommend using that, especially if exposed to UV rays (for plants with high light exposure)

The print time is particularly long, but the design is so complex that even with optimal settings, the timing remains long

To reduce the time, you can download the STL file and vary the infill between 8% and 10% (minimum required for robustness) and install a 0.6mm print head (the layers are slightly more visible but a lot of time can be saved)

However, the final result is spectacular in my opinion, and the robustness of the design ensures the vase is durable. The ability to change the color or the inner pot allows you to vary the color later or replace the pot if it gets damaged over time in contact with soil.

The internal diameter of the vase is 10cm. The external dimensions are 13 cm x 10.5 cm

🙏 If my designs brighten up your day, you can support my work by giving me a free boost. Your support is invaluable! Thank you!

If you’d just like to make a one-off donation, you can buy me a coffee here ;)

https://buymeacoffee.com/byphildesign