Gorgeous, well done. I kept them at that height because I have poor grip so its easier for me to grab them out of it

matthewsmessmakers

Comprendo il tuo problema se riesci a fare una versione coi fori degli aghi ad altezza giusta sara utile per noi. se no grazie del tuo lavoro molto utile va bene lo stesso.

I understand your problem if you can make a version with the needle holes at the right height it will be useful for us. otherwise thank you for your very useful work it's fine anyway

Bensisko61

ho stampato questa scatola tutta in pla con il filamento che simula il marmo della geetech, ho dovuto convertire tutto in pla dato che ho una stampante A1 Mini è stato un po' difficile incastrare le cerniere in verità due mi si sono rotte ma le ho incollate, nel complesso la scatola è venuta bellissima quindi condivido con te le foto e ti ho dato un booster se proprio dobbiamo cercare il pelo nell'uovo sarebbe meglio che i posti per gli aghi siano un po' più profondi nel mio caso gli aghi della pic stanno un po' fuori come si vede dalle foto comunque continua così 

I printed this box entirely in PLA with Geetech's marble-effect filament, I had to convert everything to PLA since I have an A1 mini printer, it was a bit difficult to fit the hinges, in fact two broke but I glued them, overall the box turned out beautiful so I'm sharing the photos with you and I gave you a booster if we really want to split hairs, it would be better if the slots for the needles were a bit deeper, in my case the needles from the pic stick out a bit as you can see from the photos, anyway keep up the good work

cover

MounjaroBoxesFront.jpg

MounjaroboxFront.jpg

MounjaroBoxV1open.jpg

MounjaroboxV1openflat.jpg

MounjaroboxopenV1Upright.jpg

MounjaroboxV2openupright.jpg

MounjaroboxV2litup.jpg

Full Empty space for Storage

plate_1.png

plate_2.png

Modified larger space for 5th needle

plate_3.png

2026-01-01_2be85f50e811b8.jpg

Infill changed to octogram sprial for effect and also on the top/bottom plates. Extra wall for strengthSettings for holographic plate.First print had adhesion issues (blue box). Reprint was much perfect.Fits on the A1 mini just about!Tested on the A1 mini (purple) and on the A1 (blue) both on holographic plates in PLA

0.2mm layer, 3 walls, 25% infill

TomSmith

Mounjaro Box

Original Model adjusted as follows: V1 includes a much larger space for wipe/5th needle storageV2 removes the specific 4 spaces for needles replacing it with a long storage area which allows for prescription storage too when travelling abroadClips have been resized to fit with the box better

Print Profile(1)

Bill of Materials

Description

Comment & Rating (3)

This remix is based on

License

Related Models

Extra Space Mounjaro Box (No AMS)