SIKTC Hueforge
Print Profile(1)
Description
First model upload, this is a hueforge of a comic I love Something Is Killing the Children. All colors are bambu lab filament
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
The Model is 120x182mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.56mm) swap to Cyan
At layer #5 (0.64mm) swap to Scarlet Red
At layer #10 (1.04mm) swap to Beige for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)