TM22 Derya Arms A18 Magazine For Training

TM22 Derya Arms A18 Magazine Replica – Non-Functional Model

This model is a replica 10 round limited magazine inspired by the TM22 Derya Arms A18 platform. It is intended strictly for display, fit-checking, training visualization, and modeling purposes. This design is NOT a real magazine, NOT tested, and NOT manufactured to firearm standards.

⚠️ THIS MODEL IS A REPLICA AND MUST NOT BE USED TO FIRE REAL AMMUNITION.

The magazine is not pressure-rated, impact-tested, feed-tested, or safety-certified in any way. It is not designed, approved, or intended for live-fire use. Attempting to load or fire real ammunition using this model could result in equipment damage, personal injury, or worse.

This project is shared for makers interested in:

• Replica modeling
• Training or educational visualization
• Fitment reference
• Display or prop use
• CAD study and mechanical layout understanding

Spring & Internal Components Notice

This replica does not include a validated or functional internal spring system. If you are modeling or prototyping internal movement for non-live-fire purposes only, you will need to create or tune a spring separately.

👉 Refer to the Adjustable Spring Maker model to finalize and tune spring geometry for safe, non-functional prototyping or visualization. That tool allows controlled spring sizing and angle definition for mock assemblies and design exploration.

Important Safety Disclaimer (Read Before Downloading)

• This is NOT a real magazine
• This is NOT rated for live ammunition
• This is NOT tested for feeding, retention, or pressure
• This is NOT suitable for real firearms
• This model should never be used to chamber or fire live rounds

By downloading this model, you acknowledge that it is a replica for non-functional use only and accept full responsibility for how it is used.

Intended Use Summary

✔ Display
✔ Training / visualization
✔ CAD reference
✔ Fit-checking (non-live-fire)
✖ Live ammunition
✖ Real firearm operation
✖ Field or range use