Headlight Knob Switch for KTM - Husqvarna - GasGas
Print Profile(1)
Bill of Materials
- Threaded Heat Insert M4x0.7 L=8mm W=5.5mm x 1: M4x0.7 L=8mm W=5.5mm
Description
For any owner of a KTM, Husqvarna, or GasGas with the pull switch headlight knob, you know you're bound to lose it at some point. I recreated the OEM size, plus a longer version, to make it easier to reach behind the headlight mask. The longer variant is approx. 0.87 inches longer than the OEM.
No supports are needed; I print them at a 0.2mm layer. Most basic print profiles will work!
There are 2 variants—one with plastic threads that prints with the model, and another designed for threaded brass inserts. The threaded heat insert is an M4x0.7 measuring 8mm in length and 5.5mm in total width.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)