JX1DX1 Noli forsaken (articulated)

Finaly after months of testing its done! A (working) articulated forsaken moddel.  JX1DX1 from forsaken and from a popular A.R.G by “ihazfacelulz”

Thies joints are inspired by ball and socket joints. When i first desided to make an articulated moddle i made the joint print in place.

I tested it for ages but it always broke so i set the project aside.  a moth later i came across it again and desided to fix it. I looked at many articulated moddles and they all had slot inplace joints that where strong.

I look at images online like this one and i look at joints on figures before making somthing like in the moddel. 

That was fine but the legs and army and head where very stiff and i thoung that this would not be good for posing. 

I look at moddels and decided to make it so that the joints could come out. i like this but the legs feld to flexy now.

i decided to make the legs and head stiff by making them barely come out.  If i learn't one thing from this than it is:

“Dont try to reinvent somthing, make it better in you own use”  .

 Instructions: 

Legs are black.

Arms are red.

torso is grey.

head is red with black face.

I attached the crown to the head using wire fed through the hole in the head and crown. (There is a insert for the crown and head is alredy in the file but i did wire for extra strenght).

For the arms i printed them red and sponged some black from the bottom up but making sure not to cover the whole arm in black.

there is a hole in the bottom of one of the arms for the apple or frying pan to slot in. (watch out because you have to be carfull when doing this part).

Tie slots into the torso and i used black marker to draw the face on.

Hope you enjoy and tell me what moddels i should make articulated next!!  

(If you use joints credit me)