Ice Container for Samsung Freezer RL435EFBA88

Samsung RL435EFBA88 Ice Bucket Container - Replacement Part

Replacement ice bucket for Samsung RL435EFBA88 fridge/freezer.

Specifications:
- Dimensions: 254 × 220 × 55 mm (optimized for P1S bed, maintains exact proportions except length)
- Material: PETG Translucent
- Original part number: DA63-06386A
- Compatible models: Samsung RL435EFBA88, RL435EFBAS8/EF

Print Settings (Bambu Studio):
- Layer Height: 0.2 mm
- Perimeters: 6
- Infill: 45% Nano 3D
- Print Speed (external): 50 mm/s
- Print Speed (internal): 300 mm/s
- Supports: Auto (Standard Tree)
- First layer speed: 40 mm/s

- Ironing: The first 3MF file contains the recommended ironing tested settings only for the Bambu Lab P1S.

Post-Processing:
1. Apply 2-3 coats of food-grade epoxy resin (thin, even layers)
2. Test-run in freezer for 24h before full use

Performance:
✓ Withstands -28°C freezer cycles
✓ Rigid and impact-resistant (6 perimeters)
✓ Translucent material allows ice visibility
✓ Food-grade epoxy coating for safety

Disclaimer:
This is a DIY solution, not certified food-safe. Use at your own risk.