High Strength Reolink Trackmix Corner Mount
Print Profile(2)
Description
Corner bracket / mount for Reolink Trackmix CCTV camera.
Print in PET-G or similar material for outdoor use, have opted for 10 x wall loops and 85% infill which is probably overkill but these cameras are expensive and I didn't want the bracket to fail and camera fall.
The channel at the rear it to allow the cable to exit the original bracket at the bottom and then clip into the channel and exit at the top (ensure to create a small drip loop)
You will need 6 x M4 heatset inserts and 6 x M4x16mm screws
https://www.amazon.co.uk/dp/B0FCRVKSSV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)