Blood moon oni Hueforge
Print Profile(1)
Description
Boost Me (for free)
Help me make more awesome models!
You can check all of my other unique designs here!
My hueforge models are right here!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 254x204.61mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#646c74 PLA Copymaster 3D Grey Transmission Distance: 1.5
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Jade White
At layer #4 (0.56mm) swap to Grey
At layer #11 (1.12mm) swap to Black
At layer #14 (1.36mm) swap to Red
At layer #18 (1.68mm) swap to Jade White
Border Only Colors from here until the end.
At layer #22 (2mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)