Andy

0.16mm layer, 2 walls, 15% infill

If you are not able to print it don't leave 2 star review.... 
170 prints without problems, then you arrive.... At least describe what problem you had....

markfnc

So sah das Exemplar aus was gedruckt wurde. 

This is what the printed specimen looked like

hi, for a1 mini nothing, you could try to scale it, but you would then have to use a very fine tip to write.

could you make this available for A1 mini? Thanks!

Green3D

DaniToTheMoon

Excellent print. Scaled it down to 12cm in width to perfectly fit my Midori TN, I have setup as a bullet journal. Thanks

finstein

Buchstaben und Zahlen zum Beispiel drei und fünf hackt der Stift 0.5 mm und zum Beispiel bei der Zahl . 4 ist es nicht möglich, gerade zu bleiben 
ich vermute, sie müsste dünner sein und ich muss noch den richtigen Stift finden, mit dem man die Schablone wirklich benutzen kann

The pen, at 0.5 mm, struggles with letters and numbers like three and five; for example, with the number four, maintaining straight lines is impossible I suspect it needs to be thinner, and I still need to find the right pen to truly utilize the stencil

martin b

0.16mm layer, 3 walls, 15% infill

Unsere Tochter liebt die Schablone. War gut zu drucken.
Es wäre schön wenn es auch eine Variante mit breitem Schlitz für dickere Stifte gäbe.

Our daughter loves the template It printed well It would be wonderful if there were also a version with a wider slit for thicker pens

Only_two

rebewde (WeberCorazza-🇧🇷)

Brosef Stalin

andyschofie

serkangok

cover

plate_1.png

1709358682916_f6699c1a-1377-4ba7-8da5-5ba1ba6c168c.webp

plate_1.webp

mastermike311

IMG_2078.jpg

BambuStudioPreview.JPG

Removed unnecessary printed material (interior floating pieces for letters/numbers like A B, P, Q, 8, 9) and adjusted model layout to avoid purge line on P1/X1 printers. Prints fine in .2mm layer, but .16mm layer does better with some of the smaller details on the stencil cutouts.

plate_2.png

starsc0re

ABCD.jpg

ABC.jpg

I have never uploaded print profiles, but I saw in the comments that someone also wanted this stencil for an A1 mini, so I thought I&#39;d share my print if it helps anyone! &lt;3 Print is mostly same as original, except cut in half so it fits on the A1 mini (it might look a little strange, but it works!) and filament is set to Bambu PLA basic. I have also reduced the thickness of the stencil down to 7.5mm for ease of use.  Enjoy &lt;3

Print Profile(3)

Description

Comment & Rating (23)

License

Related Models

alphabet stencil

Print Profile(3)

Description

Comment & Rating (23)

License

Related Models