Search models, users, collections, and posts
Makpac (size 1) organizers for drill and driver
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
7.3 h
3 plates
Open in Bambu Studio
Boost
35
139
4
1
102
27
Released
Description
The makpac that both the LXT hammer drill and LXT impact driver came with, only holds 1 tool and is a size too large.
So I made some storage dividers for the smallest (size 1) makpac/mbox that allows the drill and driver to fit (along with a 3Ah battery)
The left divider is optional, leaving it out removes the storage it provides, but gives more ergonomics to take out the drill.
The dividers are specifically designed for:
- 2x 3Ah LXT batteries
- DTD173 impact driver
- DHP486 hammer drill
This might fit other tools, but at your own risk.
Instructions:
- Boxes are glued with CA glue to the bottom, it holds well.
- Has to be printed with supports
- Accessories mounted to the side of the battery of the tools have to be removed (belt hanger, bit storage,…) it order to clear the height.
Printed in Matte Charcoal PLA
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)