Portal of Worlds

Had some fun creating this with my son. Looks cool just as a portal with no characters popping out, or adding a bit of flare with them in!

Important to note that I did print all the characters with a 0.2 nozzle as wanted as much detail as possible given the size. Support removal was ok for me. The Viking one was the most challenging but didn't have to reprint any of them so just be careful and take the time to remove. In the pictures, I used a touch of acrylic paint for the demon and fallout models to make it look cooler. (despite my poor painting skills). :)

I used a small amount of glue to attach the characters to the mirrors. I did try printing them attached to the mirrors but supports often failed so is best to print them separately and glue them on.

Note: Yes, the models have been created with AI - and we break them apart to create fun things. :)

4 print profiles:

Portal_of_Worlds_V6

Plate#1 - Portal_Base

206x151x131mm / 0.4 Nozzle / 0.16 Layer Height / No Supports

Plate#2 - Portal_Top

117x35x30mm / 0.4 Nozzle / 0.16 Layer Height / Supports - Tree Auto

Plate#3 - Portal_Mirror

50x137x4mm / 0.4 Nozzle / 0.2 Layer Height / No Supports

Portal_of_Worlds_Demon

50x87x85mm / 0.2 Nozzle / 0.12 Layer Height / Supports - Tree Auto

Portal_of_Worlds_Viking

55x92x36mm / 0.2 Nozzle / 0.12 Layer Height / Supports - Tree Auto

Portal_of_Worlds_Fallout

44x94x29mm / 0.2 Nozzle / 0.12 Layer Height / Supports - Tree Auto