Perfect Handling Scraper
Print Profile(2)
Description
I have already printed many scrapers, but all of them had a problem: the angle from the scraper to the print bed was not fixed. So I scraped at the wrong angle and thereby damaged the scrapers. Then I printed another model, hoping it would work this time. However, after heavily scratching my (expensive) smooth print bed with a scraper, it was time to create a sustainable solution:
The Perfect Handling Scraper
With this scraper, the angle from the scraper to the print bed is already fixed: 9.5° - the optimal angle. I achieved this by angling the handle to the scraping edge and providing a large contact surface.
Print parameters:
- Layer height: 0.16mm
- First layer: 0.16mm
- Inner wall: 0.42mm
- Infill: 0.42mm
- Infill density: 10%
- Infill pattern: 3D Honeycomb → very stable
Feel free to add your optimized print profile and comment with a photo of it!
An improved version of the scraper is now available: Perfect Handling Scraper - Improved Version
Don't forget to like, boost, and follow :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)