Mini Ladybug No AMS
Print Profile(1)
Description
Happy new year lucky charm for 2026.
This tiny ladybug is just the size of your fingernail. Perfect to be glued onto a 1 cent piece or any other object to serve as a good luck charm. The three-color model is printed in separate pieces so you do not need an AMS, there is almost no waste and it is super fast!
Model printing time 8 minutes
Only 1g of filament in total
Print Settings
0.16mm layer height
no supports
print by object
2 walls
6 bottom shell layers
6 top shell layers
wall generator: arachne
transitioning threshold angle: 40°
Dimensions
Lenght 14mm
Width 13 mm
Height 5mm
Assembly
Simply press fit the white eye piece from below into the black base, make sure the orientation is correct.
Add the red part from the top and press it all firmly together on a flat surface.
Note
Make sure you have dried your Filament properly and use a clean build plate. Due to these being tiny parts make sure you have good bed adhesion!
Happy Printing and Happy New Year 2026!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (26)