Receiver cover XRAY XB8 AMB RC4 Pro Transponder

Hello

I have designed a receiver cover here for the XRAY XB8 Buggy with a built-in AMB RC4 transponder that is screwed in from the inside, and there will also be one or two holders that can be screwed onto the original cover from above.

In the pictures, you can see my cover which still has a switch and a connection for a temperature sensor,

these two openings are not present here, but you can simply set a negative in the desired size so that you get a suitable hole/opening for your switches.

For the screws for the transponder holder, use 4 pcs. M3 x 5 mm (not longer) e.g., XRAY 902305