Demon Slayer - Wind hashira/Sanemi hueforge
Print Profile(1)
Description
The dimensions are 240mm x 138.78mm (you can scale it down if you want, but keep the Z to 2mm)
A follow would help a lot! <3 Thank you!
Layer height 0.08mm (extra fine)
Initial layer height 0.16.
Sparse infill density 100%, rectilinear.
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.84mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Jade White
At layer #14 (1.2mm) swap to Yellow
At layer #15 (1.28mm) swap to Brown
At layer #16 (1.36mm) swap to Jade White
At layer #22 (1.84mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)