Launch pad for New Year's Eve rockets
Print Profile(1)
Description
Print Files
- Stabilizer
- Base
Additional Components
- 3 × 1.0 m pipe M25 electrical conduit
- 1 × approx. 0.4 m pipe M25 electrical conduit
Assembly
The couplings were removed from each of the longer pipes. The stabilizer pipe is cut to the required length after assembly.
The stabilizer has three side holes where an M4 thread can be cut if needed to secure the pipes. Alternatively, an M4 screw can also be screwed in directly if necessary.
Due to manufacturing tolerances of the pipes used, it may be necessary to additionally glue them to the base.
For use, the base is either fixed to the ground with hooks or weighted down with additional weights (e.g. stones).
⚠ Important Safety Notice
The ramp alone does not offer sufficient stability, especially in windy conditions, and can tip over after igniting the rocket. Additional securing is mandatory.
Disclaimer
The use of this model is entirely at your own risk. The creator assumes no liability whatsoever for property damage, personal injury or other consequences arising from the printing, assembly or use of this model.
Handling of fireworks must always comply with the legal regulations of the respective country and the manufacturer's instructions. This model is not a tested or certified safety product
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)