PTFE Bowden Tube Bulkhead Pass-Through
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
Will work for boosts. :-) And, please leave me a comment and photo of your print of the design.
This is a bulkhead pass-through fitting designed for 4 mm PTFE Bowden tubing. It installs in a 3/8 in (approximately 10 mm) bulkhead hole and provides controlled support and optional retention of the tube.
The main body includes stress-relief geometry at both the entry and exit points to reduce kinking and wear on the PTFE tube.
An optional compression ferrule and nut are included. When used, the ferrule lightly compresses the PTFE tube to hold it in place. When omitted, the tube can slide freely through the fitting.
Design notes
- Designed for a 3/8 in (approximately 10 mm) bulkhead hole
- Compatible with standard 4 mm OD PTFE Bowden tubing
- Stress relief at tube entry and exit
- Optional compression ferrule and nut for tube retention
- Can be used as a fixed pass-through or a sliding guide
Installation notes (optional). For a permanent, airtight installation, a small amount of caulk or high-temperature silicone grease can be applied around the threads at the bulkhead hole and a thin film on the outer diameter of the ferrule.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (15)