Connect 4 - 4 in a row - self-separating stones
Print Profile(9)
Description
- A completely re-engineered Connect 4.
- The thread is designed completely from top to bottom without interruption.
- The thread starts at the very top, so there is no more jamming when inserting the game pieces.
- Print times have been significantly reduced.
- The base can now also be disassembled again.
Assembly:
If you want a permanent connection, you can use a drop of PLA glue
Note: Please check each row for clearance with a piece BEFORE assembly.
If one or more rows are not free, please proceed as shown in the gif below.
The reason is the seams, which are unfortunately unavoidable. → see picture R below
- Base
2. Place tower in base
3. Insert base tab
4. Press tab down - Done
→ Picture R: Cleaning the rows with the help of 8 pieces
Note: I used a fuzzy skin when printing.
The print profiles have NO fuzzy skin!
I will add print profiles WITH fuzzy skin later.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2484)