20.4mm Button, screw mount, enclosed version

This is my adaption of the button cover made by Aptimex.

Increased size due to an added outer shell to guide the cap.

Added a Power Symbol on top, but version without it is also included.

Added a small notch at the bottom to guide the connection wires through.

Small disadvantage is that pressing on the border of the cap might not trigger the button.

ATTENTION: Because of the outer shell the assembly has to be done this way:

1. Insert Stem thoroughly into the Guide
2. Insert Stem+Guide into the Mount
3. Press the Cap onto the Stem

Printed and tested with eSUN PLA+ and Bambu PLA