Holoprojector (Dome only) - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Crafty Falcon

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

X1 Carbon

P1S

H2C

P1P

H2D

X1E

H2S

A1 mini

P2S

H2D Pro

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(9)

Open in Bambu Studio

Boost

115

Released

Bill of Materials

Bambu Filaments

Select all

Clear (32101) / Filament with spool / 1 kg

PETG Translucent

Description

I had issues printing original dome from the file so I decided to make my own dome and came out better then the original that i tried printing. This file is originally from https://makerworld.com/en/models/1319928-holoprojector-prop?from=search#profileId-1355871 however I had issues with the dome part. This file is for the dome itself and NOT the base. Pictures represent the dome fitting and light passes through the dome. I printed using PETG Translucent filament.

Comment & Rating (10)

@joseacr

Print Profile

0.16mm layer, 2 walls, 15% infill

I had several problems with the printing of the original dome but this one printed perfectly the first time!!!! beautiful! Thanks for the contribution!

Show original

@blunan

Print Profile

0.16mm layer, 2 walls, 15% infill

Great improvement, printed a lot easier :)

@jdemato

printed it with Translucent/Clear PLA, 0.16 height and with the tree supports set to slim and a top and bottom z distance of .32mm (everything else remained the same that the OG file recommends) and this version printed out absolutely perfectly and was very easy to remove supports as well — thanks for this improved remix.