Raspberry Pi 3b+/4/5 NES Case No AMS Needed
Print Profile(8)
Description
EDIT: Added 3b+ and 4 lowers, the upper parts and decorations are in the main 3mf!
This is a raspberry 5 case that looks like an NES, there are a lot of options, there is a top section and bottom section, there are 2 bottoms 1 requires 4 m2.5x screws, the holes should be tight enough to hold the screws (I used 3mm but 4mm should work to) if its too lose there is enough room to drive the screw up and you can use a nut or some standoffs. the upper had 3 different options, 1 has no nameplate option and 2 others you can use a large nameplate or small nameplate, I know the NES didnt have the oval but putting it on this helps hide the oval hole
DO NOT use matte pla for the lower the tabs will probably break
The Top section just snaps on, I suggesting setting the right side first the as the left can be squeezed in a bit.
The buttons are kinda hard to push in you may want to trim them down a bit.
There is a power button option as well!
I will at some point try to make a 3b version and if anyone has a 4, if you try making this for the 4 please tell me if it works!
EDIT: Added Covers for the back ports, left side ports and an Internal Fan Cover
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (45)