Shadow Ninja: Aerial Strike (2 Sizes)

【Title】 Shadow Ninja: Aerial Strike (2 Sizes)

【Summary】 A dynamic ninja figure diving from a castle roof. Designed for PLA Basic Black to create a stunning silhouette. No AMS required. Includes Mini & Standard sizes.

【Description】 IMPORTANT: PLEASE READ FIRST

• NO AMS REQUIRED: This is a single-color print.
• READY TO PRINT: The print profile is fully tuned with strength modifiers (100% infill for weak parts). You do not need to change any settings.
• 2 SIZES INCLUDED:
  • Plate 1: Mini Size (60mm Base)
  • Plate 2: Standard Size (90mm Base) -> Just select the plate you like and hit Print!

Shadow Ninja: Aerial Strike

Bring the authentic spirit of "Cool Japan" to your desk. This model captures the dynamic moment of a Ninja launching an aerial strike from a Japanese castle roof into the darkness.

Designed to be printed in PLA Basic Black, it creates a beautiful silhouette that looks like a shadow come to life.

Highlights

• Authentic Japanese Design: Modeled with attention to "Cool Japan" aesthetics.
• Dynamic Silhouette: Best viewed with backlight (e.g., placing it by a Window or Light).
• Optimized Strength: Reinforcement modifiers (100% infill) are pre-applied to ankles and weak points.

Print Settings

• Material: PLA Basic Black (Used in photos). Matte Black is also good.
• Nozzle: 0.4mm (Recommended).
  • Note for PC Users: 0.2mm nozzle is possible for higher detail. Please change the nozzle setting in Bambu Studio manually. (Untested, use at your own risk).
• Layer Height: 0.08mm High Quality (Recommended for smooth roof details).
• Support: Tree Support (Auto) required.
• Infill: 15% (Modifiers are set to 100% automatically).

Important Notes

• Support Removal: Please be very careful when removing supports around the Scarf (Muffler) and Sword. These parts are thin and delicate.
• Orientation: The model is oriented for the best balance of strength and detail. Please do not rotate it.

If you like this model, please boost and share your photos!

-----------------------------------------------------------------------------------------------------------------------------------

🇯🇵 For Japanese (Japanese Only)

IMPORTANT: Please read first

• AMS Not Required: Can be printed with a single-color printer.
• Pre-configured: Settings for "100% infill" are pre-applied to parts prone to weakness (such as ankles). Please print as is without changing any settings.
• 2 Sizes Included:
  • Plate 1: Mini Size (60mm Base)
  • Plate 2: Standard Size (90mm Base / 150% Enlarged Version) -> Please select the plate of your preferred size and print.

Shadow Ninja: Aerial Strike

This is a silhouette-focused figure inspired by a ninja leaping from a castle roof into the dark night. When displayed in a backlit location, such as by a window or in front of a light, it appears like a silhouette.

Highlights

• Authentic Ninja: This is an authentic design created by a Japanese person with "Cool Japan" in mind.
• Optimized Strength: Settings to enhance strength (cylinder modifiers) are pre-incorporated into easily breakable ankles and sashes.
• Filament in Photos: PLA Basic Black (black) is used.

Print Settings

• Nozzle: 0.4mm Recommended.
  • *Printing with a 0.2mm nozzle is also possible, but in that case, please change the nozzle setting in Bambu Studio (this has not been verified, so proceed at your own risk).
• Layer Height: 0.08mm High Quality (Recommended for bringing out roof details).
• Support: Tree support required.

Important Notes

• Support Removal: When removing support material around the muffler and sword, please proceed with extreme caution as they are very fragile.