Renualt 5 Keychain
Print Profile(1)
Bill of Materials
Description
Simple renault 5 keychain.
The print in the image is done using a 0.2 mm nozzle. If you use a 0.4 mm nozzle scale it up a bit and ensure that Arachne is enabled.
You can use a smooth or textured PEI, just make sure its clean. If you have adhesion issues you can try using some hairspray as it will help. (Bumping up the heatbed temp a bit could also help).
Some patience may be required as it is an intricate 3d print.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)