Spooler - Free 3D Print Model

Search models, users, collections, and posts

FiBaLi

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

1.8 h

1 plate

4.7(303)

0.2mm layer, 7 walls, 30% infill

Designer

2.5 h

1 plate

4.6(50)

0.2mm layer, 6 walls, 25% infill

1.9 h

1 plate

4.5(39)

Open in Bambu Studio

Boost

485

1297

471

112

5.2 k

3.6 k

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

Servus

Looking for a simple quick device to print cardboard rolls to Bambu own ??
Then you are right here!!
I think I don't have to say anything just print it
Then the few grams of supports go away
on a Bambu roll on it and into the cordless screwdriver
piece of ptfe hose at hand
Filament through PTFE hose
and the party goes off

I printed it in PLA and it lifts great
You don't have to turn the cordless screwdriver too tightly

Watch on my profile

Share it with your friends and have fun with it

Comment & Rating (471)

@Kaskat82

Pinned by Designer

The spool holder is great, but if you have larger spools like Jayo for example, you can find adapter rings from me https://makerworld.com/en/models/2648048-jayo-adapter-spool-holder?profiled=2927490#profileId-2927490

Show original

@user_2853407347

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

Works perfectly. So far i used it for spooling 5 complete 1kg spools and there is no issue with strength so far. threads working good. maybe a small chamfer could make inserting it a bit easier. but thats fine tuning.

The profile uploader has replied

@FiBaLi

thank you for the feedback. did you use pla or petg??

@user_2853407347

Boosted

i used pla. if it breaks i will give it a try in petg or maybe some cf reinforced filamet but so far no need for this

(Edited)

@Mhiles

Print Profile

0.2mm layer, 6 walls, 25% infill

The thread was initially somewhat stiff, but it functioned well afterward. Rewinding also worked with a non-Bambu spool. Nothing broke. Printed in PLA

The profile uploader has replied

Show original

@FiBaLi

That makes me very happy 👍😉

Show original

@fraction

it’s very weak and easy to break

The designer has replied

@FiBaLi

which setting did you use where are the walls?

@fraction

0.2mm layer, 25% infill

Show original

@FiBaLi

Replying to @fraction :

walls?? on the picture looks like there is no walls??

@user_745271168

I am printing the filament rewinder as a test in PETG with 10 walls and the wall generator enabled. Since the part will be subjected to mechanical stress, I want to check if it becomes stable enough and runs smoothly as a result. After that, I will test if the stiff PETG spools can be evenly rewound with it, and report whether the settings have worked

Show original

@user_745271168

Short text to the designer: Hello, the bit holder broke after the first use. Please either reinforce the part significantly or alternatively provide a mount for your own metal bit holder. A stable 1/4-inch hex mount or a suitable insert hole would be useful so that a separate metal bit part can be inserted. This would make the stressed area significantly more robust than a completely printed bit holder

Show original

@batt_incd

I needed to respool a single broken roll of Spidermaker and didn't want to spend the afternoon printing parts, assembling or hunting down drill bits, screws or pencils. Printed this single print with PETG in a little over an hour, pulled it off the plate, connected the drill and my broken roll is now respooled. Exactly what I needed without a bunch of hassle. Thanks for the simple, useful design!

(Edited)

The designer has replied

@FiBaLi

thank you for the feedback. i am happy to hear that😊👍

@BambluShark

Catastrophic fail after PETG print. Broke within seconds.

The designer has replied

@FiBaLi

did you print wirh your own profile? or did you use mine?

@BambluShark

Replying to @FiBaLi :

Yours. 6 walls.

@Frozzty

Print Profile

0.2mm layer, 7 walls, 30% infill

wery helpful tool, too spool on empty rolls

The profile uploader has replied

@FiBaLi

i am glad to hear that👋thank you for feedback👋👍

@user_2978635908

Print Profile

0.2mm layer, 6 walls, 25% infill

cool

@user_2978635908

I had a spool come apart and could not compress it enough to lock it. this worked to squeeze it together and it will fit in the AMS. once it’s down more I’ll try to lock it. thanks for the file.

@Matt_XT600

Print Profile

0.2mm layer, 6 walls, 25% infill

It works.

The profile uploader has replied

Show original

@FiBaLi

That's great to hear👍

(Edited)

Show original

@LukeLumiWolf

Print Profile

0.2mm layer, 6 walls, 25% infill

Spools slip but added same electrical tape to make it not slip

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bambu Spool

Bambu Lab

143.8 k

19.4 k

Filament Spool Winder

V3 Precision

26.9 k

6.1 k

Spool lamp

Hugo

1.7 k

3.8 k

V-Spooler

Fyrby Additive

31.9 k

11 k