Stiletto
Print Profile(1)
Bill of Materials
- Assembly x 1: - 6 or 8mm carbon tubes, exact lengths are listed in the spreadsheet for each plane - Some M3 screws and nuts - Few grams of TPU needed for the flexible ailerons hinges. - Servo linkages are recommended with a ball joint, the rods are not always pulling perpendicular to the control surface. - CA glue, with or without activator, works very well on PLA. - Servo wells are made for Emax MD08/09 servos, standard micro size, 2mm reflex up on both ailerons
Description
Hello All!!!
I have stubled across a bunch of Fpv RC cruiser type planes that actually print, assemble, and perform very well! As rare as it is to find that in an RC aircraft on here, or anywhere online for free, I had to share!!!
Olivier_C on RCGroups.com has posted many free planes as well as the settings. I would like to not only share that with my Bambu Fam, but also use a test to set up 3mf on print ready build plates for Bambu users. I plan on sharing more exciting RC fun in the future and want to make it as seemless as possible. Please be patient as this is a test. I will provide resources to the designer and original files.
Thank you!
Happy printing and flyin!
P.S. this is one of the more advanced flight envelopes. Use the link and try out the Rifter if you are an enrty level pilot. I was personally excited to fly this airframe, so I chose to upload it first. I will be sharing n posting not only more of his wonderful models, but many more!
Documentation (21)
This remix is based on
License
Comment & Rating (36)