Gary De' Snake • Zootopia Inspired • Flexi Print

Zootopia 2 just dropped, and here’s my model inspired by it: Gary De’ Snake! 🐍💛

This model is designed to be print‑in‑place and fully flexible, with articulated joints printed in one single piece. I also created multiple versions so everyone can pick their favorite.

PRINT PROFILES

Gary De' Snake — Single Print — Multicolor PLA

⚠️AMS or Multi‑Extruder System Required 
Here you’ll find a multicolor version of the model printed in a single plate, already colored and fully assembled.
 

Gary De' Snake — Single Print — Multicolor TPU

⚠️AMS or Multi‑Extruder System Required 
I also printed this model in multicolor TPU and it turned out super fun — especially for kids! 🤩
 

Gary De' Snake — Multi Plate — Multicolor PLA

⚠️AMS or Multi‑Extruder System Required 
This version comes split into all its parts so you can print and assemble them later. The body and eyes are printed in multicolor.
 

Gary De' Snake — Multi Plate — NO AMS — PLA

⚠️No AMS or Multi‑Extruder System Required 
Here you’ll find a version of Gary split into all its parts, printable without AMS. For the body, I recommend Bambulab’s Basic Gradient PLA to achieve a smooth, multicolor‑like effect.
 

Assembly Tips for the Last Two Profiles 🛠️

I recommend gluing the parts in place in this order:

• Eyes — you can print them multicolor, or simply paint the pupils black afterwards.
• Tongue — insert it at an angle and push it gently into position.
• Tooth — since it’s very small, using tweezers makes placement much easier! 🦷✨