Drain Bowl for LG Washing Machine Filter - Ø74 mm

A practical bowl designed to collect dirt and residual water released when opening the drain filter of LG washing machines.
Helps prevent water from spilling onto the floor and makes filter cleaning much cleaner and easier.

Key Features

• Designed for LG filter openings with Ø74 mm diameter
• Integrated curved chute that guides water and debris directly into the bowl
• Stable geometry that rests securely against the washing machine front
• Smooth internal surfaces for easy rinsing after use
• Optimized for FDM 3D printing

Print Settings

• Printer: Bambu Lab X1 Carbon
• Profile: 0.20 mm Standard
• Material: PLA Basic
• Layer height: 0.20 mm
• Wall loops: 2
• Top layers: 5 (1.0 mm)
• Bottom layers: 3
• Infill density: 15%
• Infill pattern: Grid
• Supports: enabled (used)
• Process type: Global
• Single object on plate

Print Statistics

• Model filament: 12.06 m (36.55 g)
• Support filament: 1.64 m (4.96 g)
• Total filament: 13.70 m (41.51 g)
• Estimated print time: 1 h 29 min
• Estimated cost: 1.04

Compatibility

LG washing machines with a 74 mm filter opening
(please measure your filter opening before printing)

How to Use

1. Place the bowl under the washing machine filter opening
2. Slowly unscrew the filter
3. Water and debris flow directly into the bowl
4. Empty and rinse after use