Universal Component Connector (Pin & Slot System)

English Version:

Universal Component Connector (Pin & Slot System)
 

Description: This universal connector allows you to firmly join two parts using a slot and a separately printed pin. The connection is stable but can be easily released and disassembled if needed. Perfect for modular projects!
 

📂 File Contents: The .3mf file contains 3 different pin variations to cover different printer tolerances:

• Standard: 0.0mm tolerance
• Loose: -0.1mm (fits looser)
• Tight: +0.1mm (fits tighter)

⚙️ Instructions & Tolerance Test: Since every printer is calibrated slightly differently, please print the test file first to check which pin fits best for your setup.

🛠 How to use in your own projects: To use this connector in your own designs:

1. Export the negative volume (cutout object) and the matching pin as STLs.
2. Import the negative volume into your CAD software or directly into your slicer.
3. Place the negative volume at the desired connection point and perform a boolean operation (subtract/cut). (Note: You can often import it directly as a "Negative Part" in your slicer.)
4. Important: Please make sure to apply the print settings (Ironing/Top surface smoothing, Seam position on the pin, etc.) exactly as set in the example file to ensure maximum stability and a smooth fit.

Have fun with this little model! 
If you have any remarks or suggestions, I would be happy to receive a comment and a rating.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

German Version:
Universal Component Connector (Pin & Slot System)
 

Description: This universal connector allows you to firmly join two parts using a slot and a separately printed pin. The connection is stable but can be easily released and disassembled if needed. Perfect for modular projects!
 

📂 File Contents: The .3mf file contains 3 different pin variations to cover different printer tolerances:

• Standard: 0.0mm tolerance
• Loose: -0.1mm (fits looser)
• Tight: +0.1mm (fits tighter)

⚙️ Instructions & Tolerance Test: Since every printer is calibrated slightly differently, please print the test file first to check which pin fits best for your setup.
 

🛠 How to use in your own projects: To use this connector in your own designs:

1. Export the negative volume (cutout object) and the matching pin as STLs.
2. Import the negative volume into your CAD software or directly into your slicer.
3. Place the negative volume at the desired connection point and perform a boolean operation (subtract/cut). (Note: You can often import it directly as a "Negative Part" in your slicer.)
4. Important: Please make sure to apply the print settings (Ironing/Top surface smoothing, Seam position on the pin, etc.) exactly as set in the example file to ensure maximum stability and a smooth fit.

Have fun with this little model! 
If you have any remarks or suggestions, I would be happy to receive a comment and a rating