Dr. Autistic

Search models, users, collections, and posts

Mr. Autistic

3D Printer>Test Models

IP Report

Print Profile(1)

All

X1 Carbon

H2S

P1P

X1E

H2D

P1S

H2C

A1 mini

H2D Pro

P2S

X2D

A2L

0.2mm layer, 20 walls, 20% infill .020 Slice Gap, .009 Res.

Designer

10.5 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

101

103

Released

Description

Welcome to Autistic Nomad 3D Printing

Dr.Autistic STFU V4.9 Beta

22LR-5.56 Suppressor with active air channels.

ABS-CF, ASA-CF, PA6 or PA12 even PC-CF I Used ABS-CF On my personal one.

Make sure filament is Dry, use CF or Nylon or both.

Pay attention to your printer manufactures recommended temperatures too. and STFU and Be quiet with that boomstick now.

MAKE SURE TO CHANGE THIS SETTING IN QUALITY.

I Do .009-.011 Resolution on all Prints and ALWAYS Change Slice Gap to .020 As these make your prints Stunning even Using a '

.02 Strength Profile Which is this Print.

Any Carbon Fiber Filament is Fine. I've Listed some for you. I Used ABS-CF which is Similar to the ABS-GF.

Likely my Next Suppressor. “Dr.Autistic Surge 556”

Boost Me (for free)

Hey makers! I’m Dr. Craig (RealAutisticNomad3D). If our tutorials help, please BOOST: like, comment, and share. Your support grows our reach, attracts sponsors, and funds free, inclusive 3D-printing lessons. Tag a friend who’d love to learn. Thank you! 💚

Dr.Autistic “Minotaur 2K22 9MM” (Release in the New Year,Needs some Tweaks.)

2011 OffShoot

Thank you Please Boost and Follow I Have Lots more Coming!

Here is a Teaser of One of the 17 Items I;M Currently Working On.

My Socials and Contact Info are as Follows:

Step into a workshop where imagination meets precision—my 3D models are engineered with obsessive detail, artistic intent, and real-world usability in mind. Whether you’re a creator, gamer, hobbyist, or collector, these designs are built to elevate your projects from “nice” to “next-level.” Download the models, put them to work, and see the difference craftsmanship makes. For previews, updates, behind-the-scenes process, and a community that actually cares about quality over hype, follow and visit my Facebook page at https://www.facebook.com/RealAutisticNomad3D. This isn’t mass-produced filler—it’s purpose-built design. Come see what you’ve been missing.

Comment & Rating (19)

@Autistic_Nomad

Pinned by Designer

I appreciate the Boosts y’all and just out of curiosity of everybody who is downloaded it what are your thoughts? Is there anything that could be improved? Let me know.

(Edited)

@Autistic_Nomad

Thanks For the Boost bruh. anyone with ideas or requests (Design,Caliber,Length etc.) if so DM me and I will Put my PHD to work for ya👀😎

The designer has replied

@user_1438469287

.30 cal 1/2 20 would be amazing

@Autistic_Nomad

Replying to @user_1438469287 :

anytime it was earned

@user_324751297

Replying to @user_1438469287 :

did this ever happen?

@user_1205855573

If you make the threads 5/8x24, you could make use a $5 aluminum or steel (5/8x24 to 1/2x28 adapter) off of Amazon to make the design Form 1 worthy. The branding is also obnoxious and is so deep, it jeopardizes the structural integrity. As it sits, it's not worth the paperwork for a test print.

The designer has replied

@Autistic_Nomad

yeah i was gonna make a couple like that. in 5 minutes my new 22/223 shh device will be up.! boost and like please and thanks

@Autistic_Nomad

Threads will hold btw. also new model up.

@user_1205855573

Replying to @Autistic_Nomad :

Where's the new model? It's not showing up

@user_3819395577

Boosted

pretty awesome can! tested with petg-CF on a .22r and it was a lil less than 1/2 the Db on a noise tester- is there a chance to get a follow up one about 12”? would like to try it in PA12-cf or gf.

@Autistic_Nomad

thank you to everybody who’s boosting I really appreciate it

The designer has replied

@user_1438469287

no worries. .30 cal 1/2 x 20 would be spectacular

@Autistic_Nomad

Replying to @user_1438469287 :

give me a week or so I’ll have it here or my printables and Oddysee. thank you for participating. I appreciate that so much so in fact that you get to name this one thing you want, but it has to be funny.

@poppa_65

does pla+ work ?

The designer has replied

@Autistic_Nomad

Yes it absolutely Does. 22lr no changes, 223 and 556 lower your gas and you'll be fine with PLA

@Autistic_Nomad

Thank you for the Boost. Ill be uploading a new Shhhh Device this week.😎

@user_2636108355

what threads is it

The designer has replied

@Autistic_Nomad

1/2x28 22LR, 223, 5.56 (must lower gas with adjustable gas block) but from experience it works perfectly fine

@JesseGraves

Print Profile

0.2mm layer, 20 walls, 20% infill .020 Slice Gap, .009 Res.

No more

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.