Lilo & Stitch Night Light with Timer

Welcome

I hope you like what you see!

Note: The following battery box with LEDs was used: innotree Aufgerüstet 6er-Pack Lichterketten mit Timer, Batterie Kupfer Drahtlichterkette 3M 30 LEDs Lichterketten Weihnachten Batteriebetrieben Wasserdichte Lichter Flasche Dekoration, Warmweiß : Amazon.de: Beleuchtung

!!!!!

Please print all threads with 0.1mm layer thickness, otherwise it may pull strings to the center

INFILL please 100% and walls at 4, otherwise you will see infill shadows. Layer check recommended

Please flush the nozzle thoroughly to avoid printing foreign colors

!!!!!

I also have other lampshades (Clean, Minecraft - link below)

Description:

The lamp consists of 3 printed parts and a fairy light string with 2x battery box - incl. 6h timer

If desired, the lettering at the bottom of the switch can be printed in color

The lamp is assembled as follows:

Starting point:

Thread the end of the fairy lights from bottom to top until the last LED

With the last LED, wrap it once around the base to fix the start of the winding

Then wind it down through the exit groove along the lamp's path

Once at the bottom, you can immediately use the first base to secure the winding

Then wrap the rest around the bases at the bottom.
(only as much as you want)
You can shorten the chain at any point

(Each LED costs a few minutes ;-)

Place battery box and screw on the tower. (Do not use force, it will be a bit harder the first time

It helps to carefully screw back and forth without the battery box first to free up the thread. (or print the thread directly with 0.1 )

Voila! Now only the lampshade is missing!

By the way, the others I offer with different themes also fit here.

Model #2 , as of Dec 27, 2025

Your wishes are welcome!

Link to Minecraft version:

Minecraft 6h Timer Night Light LED Fairy Lights – Free 3D Print Model – MakerWorld