Spartan 13 - Base Armor - Mk V(B)

Mk. V(B) armor for Dummy 13 Posable models! 

Based on the incredible work of Lucky 13 Toys, these armor pieces are fully compatible with the frame of the Dummy 13 action figure (printed at 150%). I recommend printing them at 0.08mm extra fine settings for clean details, however these files are compatible up to 0.16mm. They'd probably work at other heights as well, they're pretty robust.

Model Details:

• Base Model: Dummy 13 (Original Creator) https://makerworld.com/en/models/183780?from=search#profileId-202639
• 4 color printing recommended! Swap the first color for colorful combinations!
• IMPORTANT: Armor is scaled to 150% Dummy 13! Print accordingly.

Printing Process: For this project, I used my Bambu A1 with it's AMS Lite unit which let me print these Spartan parts multicolor! Highly recommend, printing the helmet with some shiny material for the visor really makes it pop!

• Printer: Bambu Lab A1
• Filament: Bambu Lab Basic PLA

The profile has 1 plate!

1. Utilized tree supports! Feel free to modify them as needed. Most models do not need them.
2. If you want to speed up the print, consider moving the helmet to a separate plate (it's the only model that uses the visor material).
3. Follow Original Dummy 13 video for guidance on assembly. The armor assembly is based off the Dummy 13 armor, and should snap on in a near-identical manner.

Additional Notes:

• Currently working on a full magnetic attachment system, along with as much of the armor from Reach (and then Halo Infinite) as possible! If you'd like to see specific armor, let me know.
• This is version 1, so let me know any issues you find, or any suggestions you may have!