hueforge John Cena Tribute
Print Profile(1)
Bill of Materials
.jpg)
Description
Heuforge disponível no makerworld_ 🔥
Um pequeno tributo a um dos lutadores que recentemente se reformou: johncena 💪
Impressão realizada na P1S, com filamentos Lotactree e Bambu fornecidos pela corexy.pt
🟧 bambulab_official Lab laranja
⚪⚫ Branco e preto lotactreept
You can’t see me 👋
Hueforge available on MakerWorld.com 🔥
A small tribute to one of the fighters who recently retired: John Cena 💪
Printed on a P1S using Lotactree and Bambu filaments supplied by CoreXY.pt
🟧 Bambu Lab Orange
⚪⚫ White and Black Lotactree
You can’t see me 👋
Project: john cena WWE.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Orange
At layer #19 (1.6mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)