Print Profile(1)
Description
This is the beggining of a new series of mine.
I recently started playing around with HueForge and to be hones the results are stunning. Unfortunately the photos I managed to take can't really show the result, so please consider giving it a try.
Feel free to make suggestion for next car in the comments.
Instructions:
Project: Espace_IV
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mm
The Model is 200x133.33mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ff7900 PLA Kexcelled Light Orange Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.64mm) swap to Blue
At layer #16 (1.28mm) swap to Jade White
At layer #19 (1.52mm) swap to Blue
At layer #23 (1.84mm) swap to Light Orange
At layer #25 (2.08mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)