Kodak Charmera Shell - Free 3D Print Model

Search models, users, collections, and posts

Brandon130

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

H2D

P2S

A1 mini

H2D Pro

X1E

H2C

H2S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.7(7)

Open in Bambu Studio

Boost

174

341

221

Released

Description

This is a functional remix of the Kodak Charmera Case with precise personal edits.

The following improvements have been made to the original design:

Port Access: Added precise cutouts for the SD card slot and USB-C port, enabling charging and data transfer without removing the case.
Enhanced Clearance: Increased the tolerances around the shutter button to provide a small amount of wiggle room, ensuring the button does not bind or stick during use.
Material Optimization: While compatible with various filaments, this version is specifically optimized for ABS to ensure long-term durability and impact resistance.

Kodak

charmera

Comment & Rating (10)

@user_39329523

Print Profile

0.2mm layer, 2 walls, 15% infill

the fits a bit loose but if you add some tape or something it makes it more secure

(Edited)

@user_4034509284

Print Profile

0.2mm layer, 2 walls, 15% infill

at my house I printed it with petg and it was slightly loose, I just put a square of electrical tape and it was perfect

Show original

@Funnyray

Everything is awesome. But straight out of the print when using standard PLA, the camera slides around in the case where the buttons are stopping it from fully coming off. Possibly I deformed one of the panels when fitting. Might torch the model to tighten it abit.

(Edited)