Wax Time – Nose Waxing Station

This is a simple, fun stand for nose and ear waxing sticks, designed to work with a warm‑water bath system.
 

The main container and wax cup should be printed in PETG so they can handle contact with warm water and melted wax without deforming.
I tested it with 95c water, and it kept its shape while melting wax. You should give it approx 5 minutes to melt.
You should add approx 35ml to the base so it wont overflow with the wax cup inside.
 

All is preprared on separate plate, just in case you want to reprint only sticks whenever you run out of them.

The station body itself can be printed in PLA if you prefer.
 

The sticks are tiny upright parts and are best printed in PETG with a brim, slow speeds and well‑calibrated flow; otherwise they may wobble or fail during printing. Treat them as a precision print, 5 at a time.

There is also additional moustache guard, so you can print it and help yourself to not catch your moustache in wax while removing the hair from your nose. Added additional holes so you can even wear it as a mask.

 

And the main question you need to ask yourself while using it: what if that famous villain’s moustache is really just his nose hair? Don’t walk around overgrown – if you feel a bit like him, it’s time to wax and waaaah!