Search models, users, collections, and posts

Guts - Berserker Armor - Berserk

This model is created by Image to 3D
Make Your Model

Print Profile(4)

All
X1 Carbon
H2S
H2D
P1P
P1S
A1 mini
X1
H2D Pro
P2S
A1
X1E
H2C
X2D
A2L

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
4.3 h
1 plate
4.8(10)

Improved - 208mm - Cut - 0.16mm layer, 3 walls, 10% infill
Improved - 208mm - Cut - 0.16mm layer, 3 walls, 10% infill
Designer
13 h
2 plates
5.0(2)

124mm Improved - Cut - 0.16mm layer, 3 walls, 10% infill
124mm Improved - Cut - 0.16mm layer, 3 walls, 10% infill
Designer
5 h
1 plate

312mm Improved - Cut - 0.16mm layer, 3 walls, 10% infill
312mm Improved - Cut - 0.16mm layer, 3 walls, 10% infill
Designer
29.1 h
2 plates

Open in Bambu Studio
Boost
282
686
50
10
506
215
Released 

Bill of Materials

Maker's Supply Kits and Parts
Select all
All Series
Bambu Filaments
Select all
Jade White (10100) / Filament with spool / 1kg

Description

Guts, from the classic manga and anime Berserk, clad in The Berserker Armor.  A timeless and genre defining story everyone should enjoy.

 

AFAIK, this is the only free version of this iconic pose around, even though it is still a WIP! Enjoy, like, collect, share, and please boost!!!!:

USE THE IMPROVED MODEL!!
 

Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)

Boost Me (for free)

Boost a broke dude, plox?

Comment & Rating (50)

(0/1000)

Print Profile
0.16mm layer, 2 walls, 15% infill
Amazing print I was careful with support removal but came off fine.
The profile uploader has replied
profile
1
Reply
Looks great!! Thank you so much for your rating!
0
Reply
Replying to @FallingXion :
got it painted too!
(Edited)
profile
1
Reply
Replying to @heckboy007 :
Oh that is DOPE!!! Thank you for taking the time to paint my model! Would you mind if I displayed your work on my FB?
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Very nice, I will print it much larger next time
The profile uploader has replied
Show original
profile
1
Reply
Looks great!! I can't wait to see the large version!! please post it when it's done!!
(Edited)
1
Reply
I uploaded a profile with some larger versions and improved detail if you would like to try them out! The one in the new main picture is a foot tall!
(Edited)
1
Reply
Replying to @FallingXion :
I gifted the one in the photo and printed a larger one for myself with the improved version you added. I also added a nice boost.... thanks!
(Edited)
Show original
profile
1
Reply
The print profile is no longer public
Updated Rating to 5 stars runs perfect with all the setting baked into the print profile. Thank you!
(Edited)
The profile uploader has replied
profile
1
Reply
Your printhead fell off?!? Like your toolhead cover? Please feel free to message me for diag! I've printed this profile a couple of times now without an issue other than adhesion on cape supports. What printer are you using?
0
Reply
Replying to @FallingXion :
I'm going to change my review, I must have done something incorrect. I'm reprinting it at 100% speed. I misread what it said in the print profile. I mistakenly thought it said "Lower print speeds Extremely" or some nonsense like that. It's tentatively at a 3stars, I'll change it to 5 stars if it prints correctly.
(Edited)
profile
1
Reply
Replying to @DracoPyro :
Copy that. Yeah, the lowered speeds are baked directly into the print profile for this one, primarily to help with FL adhesion and allow the large overhangs enough cooling time between layers. Lowering the speeds further may be causing your issue here. Please keep me posted! In the meantime I'll add a note to the top of the profile to hopefully prevent similar problems in the future.
0
Reply
Print Profile
Improved - 208mm - Cut - 0.16mm layer, 3 walls, 10% infill
everything is well printed👍
(Edited)
The profile uploader has replied
Show original
profile
1
Reply
Thank you so much for your rating!! It looks great!! Did you use a different material for supports?
0
Reply
Replying to @FallingXion :
all with PLA 2.0
(Edited)
Show original
profile
1
Reply
Replying to @Jurij_3DDrucker :
Ah! The lighting makes the supports look a different color in a few places! I ask because i was considering trying a petg support interface for a better finish. Thank you again!! I'll be releasing a multicolor version when I can find the time to test print it!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
It turned out great! I used a smaller layer height and made some small support adjustments.
The profile uploader has replied
profile
1
Reply
Awesome work!! I used to have a .08 layer version up, but several people had issues with it due to the lowered speeds baked in. May I ask what you adjusted in the support settings? The improved and cut version was my attempt at drastically reducing supports, lol.
0
Reply
Replying to @FallingXion :
I didn't go too small as far as layer height. I used a 0.12 layer height with a .4 nozzle. I've found my .4 nozzle tends to have trouble around 0.1mm and I haven't played too much with .2 nozzles yet. As far as supports, it was mostly minor stuff. I lean towards Tree Slim tree supports since they tend to leave less scarring on the model and are easier to remove (even if I am at higher risk of failing a print). I also increased the top interface spacing to 0.6, reduced the branch diameter to 1.5 and branch diameter angle to 4. For general items, I used a P2S with Bambu basic filament (blue grey). I've seen Matte filaments struggle with things like minis, so I try to shy away from filaments with more additives like that. Matte filaments give a better initial look out of the print, but if you plan to paint things, it doesn't really matter.
(Edited)
profile
1
Reply
Replying to @aurora_123 :
Awesome feedback, thanks! It hadn't occurred to me that some of the issues with the .08 profile were possibly nozzle related! I'm a bit gun-shy about slim tree support, as I've had a lot of failures out of them in the past, but I'm still tweaking and test printing new versions every few weeks, so I'll throw some of your suggestions in the mix! I have noticed that reducing the branch diameter angle does help a lot with the overall strength of supports, but have not ever really touched branch diameter. Please feel free to drop any more suggestions you may have!! Thanks again!
0
Reply
great quality, just be careful taking the supports off because for me the sword snapped off and the hilt also is bent, other than that it has great quality I would just love to have one twice or triple the size
The designer has replied
1
Reply
Thank you so much for the rating! The sword arm is definitely the iffiest part of this one. I'd love to blow this up a bunch, the cape just makes cutting it well a challenge, but I'm still working on it!!
1
Reply
Hey there!! I uploaded some larger cut versions of this with improved detail!! The largest stands at about a foot tall! The improved version has three different sizes included!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Details are great but supports were a challenge. lost the arm/sword and glued back on but nots his wrist is a bit funny looking.
The profile uploader has replied
profile
1
Reply
Thank you so much for your rating! I've been thinking of a good way to cut this to reduce supports/prevent breakage.
0
Reply
The print profile is no longer public
The helmet did not survive the absolute support tree removal hell
The profile uploader has replied
profile
1
Reply
Thank you for your feedback! I'm going to delist this profile and revamp the support settings on it. I was overly conservative because I was still very new to my own designs while working on it, and I think I can make them much easier to remove and reduce scarring now. Thank you again!
0
Reply
really nice print ✌️
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The profile uploader has replied
profile
1
Reply
Thank you so much for your rating!!
(Edited)
0
Reply
Replying to @FallingXion :
ty for the file m8, looks amazing
(Edited)
profile
1
Reply

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.