90dB Micro Keychain Whistle | <1 gram | 2min - Free 3D Print Model

Search models, users, collections, and posts

Sbeve

Tools>Gadgets

IP Report

Print Profile(2)

All

X1 Carbon

H2S

P1P

X1E

H2D

P1S

H2C

A1 mini

H2D Pro

P2S

X2D

A2L

Single Whistle | 0.25mm layer, 3 walls, 0% infill

Designer

10 min

1 plate

4.7(90)

Bulk Whistles | 0.25mm layer, 3 walls, 0% infill

Designer

7.5 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

243

704

104

1.2 k

502

Released

Description

Boost Me (for free)

Boosts are much appreciated!

Print-optimized whistle for the lowest material usage and print time, to easily print a whole bunch for your family, friends, office, school, etc!

VERY LOUD! Exercise caution and do not use in enclosed spaces.

These are intended to be kept on a keychain, since they may pose a chocking hazard to small children.

There's two print profiles for printing either just one whistle, or many on one plate.

Comment & Rating (104)

@unclepaul

Boosted

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

this was an extremely fast print make sure you do not use supports because I did the first time without thinking, and it fills in the air hole by making it useless, but luckily it only took two or three minutes to reprint and it works amazingly very loud. I’m thinking of printing several of these as safety whistles to put on family members keychains.

The profile uploader has replied

@Sbeve

Did you manually enable supports on the first print out of habit or was it on by default? They should be disabled in the print profile along with a few other critical slicer settings changed. Just want to make sure there's not an issue with the default settings for others in the future.

@unclepaul

Boosted

Replying to @Sbeve :

No, the profile was right. I did it out of habit. I had been printing other things that had been failing.

@Sbeve

Replying to @unclepaul :

sounds good, thanks for letting me know!

@user_1400456136

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

berry loud

@ashut0shmandal

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

white(working)- with bambu lab filament red(not working) with generic filament

The profile uploader has replied

@Sbeve

It looks like there might be air gaps on the first layer of the generic filament print. You can test that by covering or putting a piece of tape over that side and see if it works. Since it's only happening with the generic filament, it could be caused by the flow calibration, extrusion multiplier, or possibly poor bed adhesion.

(Edited)

@Plus.Prints

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

very cool

@user_688147806

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

it sounds perfect and is done in no time

Show original

@user_1687469030

ne fonctionne pas

@user_3366610490

Am I able to sell it locally? Or is there another way you would prefer?

The designer has replied

@Sbeve

If you live in the United States, I'd prefer you give them out for free

@user_2260543558

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

one printed and worked good I printed another 7 more to have around none of those 7 worked

@user_3208391506

Makes sense if they were printing by layer. Something this small you probably want to either print one at a time, or if you want print multiple get in maker world and set them to print by object and not by layer so it will print one after another instead of printing them all at once. The issue is the nozzle moving between them all makes it slightly less precise, not usually noticeable on most models but probably enough to make a tiny whistle not work.

@user_2260543558

Replying to @user_3208391506 :

thank you

@IJMW

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

Fast, loud and low filament use. Thanks!

@user_990306403

Print Profile

Single Whistle | 0.25mm layer, 3 walls, 0% infill

👍 good sound smooth print

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.