Stretch Film Dispenser

Universal Desk-Clamp Stretch Film Dispenser

Tired of struggling with large stretch film rolls while packing parcels? This fully 3D-printable dispenser turns any desk edge into a professional packing station! It is a robust, screw-clamp solution designed for efficiency and ease of use.

Main Features:

• 100% 3D Printed: No extra screws, bearings, or hardware required. Print it and use it!
• Universal Desk Mount: The screw-clamp mechanism fits any table or desk thickness from 10mm to 50mm.
• Compatibility: Designed for film rolls with an internal core diameter of 45mm or more and a maximum outer roll diameter of 100mm.
• Bonus Tool Caddy: Includes a snap-on organizer box for your scissors, cutters, or pens, keeping your workspace tidy.

Installation & Assembly:

1. Slide the Knob onto the Screw (threaded rod).
2. Screw the assembly into the main clamp body.
3. Snap the Pressure Pad onto the tip of the screw.
4. Mount it to your desk and start packing!

• Pro Tip: For an extra rock-solid grip on slippery surfaces, you can stick a piece of rubber to the bottom of the clamp and the pressure pad.

Print Settings & Profiles:

The provided print profile is organized into 3 Plates for your convenience:

• Plate 1: All-in-one (Every part needed for a complete set).
• Plate 2: Main Clamp Body + Screw (The structural base).
• Plate 3: Knob + Pressure Pad + Tool Caddy (Ideal for printing in a contrasting color).

Recommended Settings:

• Walls: It works fine with 3 walls.
• Infill: I used 10% for the clamp and 15% for the thread and the rest (Gyroid recommended).
• Material: I used PLA and it is sufficient.

☕ Enjoy my work? Treat me to a coffee:

https://buymeacoffee.com/mrdeezedd