3DTec

cover

IMG_20251224_150354.jpg

IMG_20251224_150359.jpg

IMG_20251224_152049.jpg

IMG_20251224_152104.jpg

IMG_20251224_152116.jpg

Trailer socket

plate_1.png

2025-12-24_eef50068f692c8.jpg

<ul><li>Filament: PETG</li><li>0,4 mm Düse</li><li>Druckprofil: Strength</li><li>0,2 mm Schichthöhe</li><li>6 Wandlinien</li><li>25% Fülldichte</li><li>Zufällige Nahtposition</li></ul>

<ul><li>Filament: PETG</li><li>0.4 mm Nozzle</li><li>Print Profile: Strength</li><li>0.2 mm Layer Height</li><li>6 Wall Lines</li><li>25% Infill Density</li><li>Random Seam Position</li></ul>

PETG, strenght, 0.2mm layer, 6 walls, 25% infill

<ul><li>Filament: ASA</li><li>0,4 mm Düse</li><li>Druckprofil: Strength</li><li>0,2 mm Schichthöhe</li><li>Reduzierte Geschwindigkeit der 1. Schicht</li><li>6 Wandlinien</li><li>25% Fülldichte</li><li>Zufällige Nahtposition</li></ul>

<ul><li>Filament: ASA</li><li>0.4 mm Nozzle</li><li>Print Profile: Strength</li><li>0.2 mm Layer Height</li><li>Reduced 1st Layer Speed</li><li>6 Wall Lines</li><li>25% Infill Density</li><li>Random Seam Position</li></ul>

ASA, strength, 0.2mm layer, 6 walls, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Halterung für Anhängerstecker</h3><ul><li>Für 13-polige Stecker nach ISO 11446</li><li>Halterung kompatibel für Montage auf Höhe des Stützrades (105 mm Lochabstand, 11 mm Bohrung)</li><li>2 Druckprofile<ul><li>PETG (gute UV-Beständigkeit, einfacher zu drucken)</li><li>ASA (sehr gute UV-Beständigkeit)</li></ul></li></ul><p>Prüft bitte vorher, ob das Kabel an eurem Stecker ausreichend lang ist, bevor ihr diesen Halter druckt. </p><p>&nbsp;</p><p>&nbsp;</p>

<h3>Holder for trailer plug</h3><ul><li>For 13-pin plugs according to ISO 11446</li><li>Holder compatible for mounting at the height of the jockey wheel (105 mm hole spacing, 11 mm bore)</li><li>2 Print profiles<ul><li>PETG (good UV resistance, easier to print)</li><li>ASA (very good UV resistance)</li></ul></li></ul><p>Please check beforehand if the cable on your plug is long enough before you print this holder  </p><p>&nbsp;</p><p>&nbsp;</p>

Print Profile(2)

Description

Holder for trailer plug

Comment & Rating (3)

License