Mazda RX7 FD3S Trim pieces on Bonnet vs Headlamp
Print Profile(1)
Description
These are the 2 trim panels that mount to the Bonnet of the FD and contain a little rubber part that guides the water / Air away. These pieces are, unfortunately, NLA from Mazda, hence why I scanned the objects and made them available here.
Additionally to the printed parts, which I recommend to print in ABS or ASA, you need a 1mm thick Rubber piece in the rough dimension of 110x42mm that mounts on the 4 little studs as part of the scanned objects. Here's 1 example from Amazon which you can use to cut to dimension (haven't tried it myself, since I have the originals still available): https://www.amazon.de/Easyboost-Gummiplatte-Zuschneiden-Motorroller-Kohlenwasserstoff/dp/B0FYRJYN9K
Further you need screw-clips, I also haven't tried them (yet - they're on the way) but something like this: https://de.aliexpress.com/item/1005006428347335.html
The pictures show the white piece which i printed and the black one being the original.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)