Oathsworn: Player dashboard & storage in one model
Print Profile(1)
Bill of Materials
- Filament for main bodies: PLA Magic Dark Twinkling Green from eSun x 1:
- Filament for the Oathsworn logo: PLA Silk Gold from eSun x 1:
- Magnets: Neodymium rod magnets; diameter 3mm; height 6mm; strength approx. 400g x 1:
- Glue: Instant adhesive x 1:
Description
This dashboard is different to any dashboard I saw before. It contains not only the dashboard, it also includes the storage for all character cards and the armory (if you have bought it).
The top and the bottom part can be printed without support. For the armory cover, two very small supports are needed. Due to that the armory of the warbear needs a lot of space, I was forced to develop a larger top cover than for the other characters. I have added the Oathsworn logo in the top part.
There are three slots for all the cards (including the gears). The slots are not built for sleeving! If you fill in the cards in the correct direction, you can identify the stored character if you look at the cutout on the bottom.
I have built one layer to be made of acrylic material, but it can also be printed. I prefer the acryl layer.
Assembly
To finish the model, I have glued magnets in all four corners of the bottom and the top layer. For the armory another 2 magnets are needed. So you need a total of 10 magnets for each dashboard.
Hope you will enjoy my model
License
Comment & Rating (1)