YCF Logo Keychain – Pitbike Themed Keyring
Print Profile(1)
Description
This is a small keychain featuring the YCF logo and icon, modeled as a flat tag with a hole for a standard metal keyring. The design is optimized for FDM printers and can be printed with AMS.
The model is sized for everyday use on a keyring, but it can be scaled up or down in your slicer if you want a larger bag tag or a tiny zipper pull.
Printing recommendations
- Printer type: FDM/FFF
- Material: PLA or PETG
- Layer height: 0.16–0.2 mm
- Perimeters: 2–3
- Infill: 15–25% (Grid or Gyroid)
- Supports: Not required
- Brim/raft: Optional (only if bed adhesion is an issue)
- Colors: This model is intended for AMS / multi‑material printing. The logo faces down, so all colors are on the first layer and cannot be achieved with simple manual filament swaps.
Assembly
- After printing, insert a short piece of chain or a jump ring through the hole.
- Attach it to your keyring or backpack zipper.
- Deburr the hole with a hobby knife if necessary to ensure the metal ring moves freely.
☕ Support the Creator
If you like this project and want to support my work:
👉 buymeacoffee.com/Allerzoltan
- Like 💛
- Comment if you have questions or suggestions
- Check out my other models too!
😊 Thank you so much for your support!
Boost Me (for free)
When You like my model please send me a boost :)
-It doesn't cost you anything
-But you can support my work so that more plans can be made
Thank You! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)