WLtoys k989 monoshock Original+Aftermarket
Print Profile(2)
Description
Monoshock upgrade for wl toys k989/k969
- For Aftermarket and Original shock
- File is accedentally sized too big. Please scale down to 10%. Will fix when i have the time.
- Use 0.12 or low layer heigth to make the print as detailed as possible
- Don't be afraid to use a bit of force to push the ball joint into the arm. It should snap into place and be able to move freely with a slight bit of resistance
Revision V10
- Made top holler a bit wider so drilling is not needed
- Made bottom hole a bit wider so drilling is not needed
- Moved the top holder further outwards so the shock isn't already heavily compressed from the start
- Made it so the same arms can be used for the rear aswell
- For original shock the travel is limited due to the travel on that shock
Also check out the extended servo arm:
See profile or https://makerworld.com/nl/models/2153122-wl-toys-k989-extended-servo-arm
FYI: I posted this model again on my new account.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (5)