FLIR One rear cover for extended battery
Print Profile(1)
Description
This is a cover for FLIR One (original iOS) p/n 435-0002-01-00 to use an extended battery size.
The original battery was 350 mAh and lasted about 20 minutes. This battery is 700 mAh and lasts about 40 minutes.
The battery wires will need to be cut to swap the connector. Be sure to cut one wire at a time to prevent shorting the battery, and then heat shrink each wire.
Battery from Amazon
I used screw size 1mm x 4.5mm Philips head.
Screws from Amazon
It's best to locate and mark the camera case where the cover has a thick/tall area for the screws to hold (see photos).
Also check out my adapter case to use the FLIR with Lightning connector on an iPhone 15 Pro and newer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)