elderly flower elf

boost for free , don't let your boost expire , boost to help me get filament

a hue forge of an elderly flower elf squatting down admiring the results of his tender care of all things floral 

hue forge instructions 

Project: elderly elf .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA 3D HPOJOR Black Transmission Distance: 0.3
    PLA ESUN Basic Blue Gray Transmission Distance: 3
    PLA E SUN SILVERTransmission Distance: 1
    PLA JAYLO White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to SILVER 
    At layer #20 (1.68mm) swap to White for the rest.
 Thankyou for looking at my model , if you like hue forges check out my other models , follow , like and rate 

if you can spare the time please rate , like or follow or just collect