ELP Camera Housing (USBFHD04H)

Housing for a USB ELP camera (specifically USBFHD04H). There are two options for the housing--- one design that uses self-tapping M2 screws, and the other that uses M2 heat-set inserts. The cover is meant to be a snap fit onto the main housing.

For hardware, you will need:

• 4x M2x6 or M2x8 screws to mount the camera
• 1x M5x12 or longer screw to attach to the monitor mount
• (Optional) Long M3 screw to use the existing mount
• (For heat-set insert design) M2 heat set inserts

If the current monitor mount doesn't fit your application, feel free to design another one!