DIY Slushie Maker

Introducing the first slushie maker on the entire site!

Now you can have your own slushie maker with just a 3D printer and a utility knife blade!

This model is easy to assemble; you can understand the assembly by following the modeling diagram.

Installation instructions: For the blade, use a 30° sharp-angle utility knife blade and remove the last section with the mounting hole. If you are unsure whether the blade is suitable, please print the blade holder part first. The blade installation direction is visible in the diagram.

Usage instructions: Make ice cubes using an ice mold, then align the ice cube's hollows with the spikes on the press plate. While rotating the handle, gently press downwards. If the ice gets stuck, rotate in the opposite direction and try again. After each use, the blade holder must be removed to clean the blade, otherwise, the blade will easily rust.

Safety warning: Utility knife blades are sharp, and installation carries risks. Please exercise caution.